Experience Matters - Grand Valley State University -博天堂官方

Ready for Launch

Ian
Major: Electrical Engineering This rotation I had the incredible opportunity to work on a microsatellite for a company called Spacecoin, this satellite will be launching in late December and is the first launch in the plans for a whole constellation.

Semester 2 in CAS

Izik
Major: Electrical Engineering Some key items I worked on this semester included: adding additional capability to testing equipment, developing cables, developing test station code, managing test equipment, ordering equipment, documentation and sustaining duties.

3rd Co-op Rotation

Freddy
Major: Electrical Engineering I have worked mostly on Outside Mirror products in my three co-op rotations. In this last one, I worked on debugging PCB boards using oscilloscopes, spectrum analyzers and DMMs for some projects that are currently being developed. I was part of the testing process in which involves learning customer's specifications and concepts such as EMC and best design practices on the automotive industry. With the Outside Mirror product line, it involves a good amount of building harnesses, making prototype boards and helping the Validation group with any test that needs to be done.

Co-op at Phase 1

Isabelle
Major: Electrical Engineering At Phase 1, I completely tasks such as surface mount soldering, EMC emissions scan, GPS sensitivity testing, PCB design, circuit design, data analysis, and RF design.

Controls Programming at Koops Automation

Charles
Major: Electrical Engineering All tasks surrounded programming Programable Logic Controllers (PLC). My entire time at Koops, the work I did was in direct support of an ongoing project. I was doing real work.

First Semester at SoundOff Signal

Grant
Major: Electrical Engineering Much of my role as a starting EE intern revolved around learning the company's process and products and assisting with tasks to alleviate some of the more time-intensive work from the product development teams. This involved assembling various prototype PCBs and harnesses, establishing and executing thermal tests to compare products with that of competitors, managing the electronics lab and its contents, and many other tasks to assist the EE team and Product Development team as a whole.

Viastore Co-Op 1st Rotation

Noah
Major: Electrical Engineering While working with Viastore I worked on two separate projects for GM. This consisted of commissioning various parts of an Automated Storage and Retrieval System (ASRS). This involved debugging PLC code as well as installing I/O devices, connecting them via ethernet, ensuring communication, and setting conveyors speeds to meet customer specifications.

EGR 290

Logan
Major: Electrical Engineering As a co-op of the power systems group on Corteva's Midland site, I was able to learn the engineering behind powering a extremly large chemical site. The largest project I was taked with was updating meter and relay devices for 20 different feeder circuits in two of our switching stations. This invovled updating/creating 120 different electrical drawings, specifically three-line, DC diagram, and connection diagram. In addition, I used a simulation software called ETAP to simulate faults on different parts of each circuit. This allowed us to theorectical see what would happen if a fault occured on one the ciruits, and how to relay would protect the equipment potentially impacted by the fault. I was also able to order parts for this porject, create procedures to turn specific sections of the bus off. I was also, fortunate enough to manage the implementation of one of the circuits I worked on. Unfortunately, in a chemical plant my group isn't allowed to just go turning off chemical processes when we want. It could be months to years before the other circuits I worked on could be implemented. I had other smaller projects that involved other smaller updates to electrical drawings, I was also able to experience some work with PLCs.

Phase 1 is number One

john
Major: Electrical Engineering During the first few weeks, I focused heavily on soldering and modifying circuits for testing purposes. This included learning surface mount soldering for smaller components, primarily 0402 and sometimes 0603. In the subsequent weeks, I participated in building an electromagnetic emissions chamber from scratch. Following that project, I worked on creating protoboards, laying out various components to develop prototypes for multiple projects. One of my tasks included building a test box to verify that our PCBs were outputting the correct voltages under different configurations, as shown in the picture below. My most recent project involves reprogramming and testing 200 devices to troubleshoot an issue a customer has been experiencing. These devices are set to different configurations and tested under various scenarios to replicate and resolve the field issue.

Controls Engineering Co-Op at Adient

Zachary
Major: Electrical Engineering For this semester of my Co-Op, I had several projects. All of these projects were related to PLCs and HMIs. Every PLC and HMI that I worked with was Allen Bradley. One biggest projects that I worked on was updating all of the PLCs to their latest version. This helped the plant be more standardized and allowed IT to support fewer firmware versions. I also got to create screens on HMIs so that operators and maintenance could print test labels out of printers. This was important to help troubleshoot problems with printers. Finally, I also got to write my ladder logic in the PLCs. For this project, I wrote code to send messages to the HMI to display the status of the cell.

Mission Design and Automation Co-op Experience

Marcus
Major: Electrical Engineering I worked on two different projects throughout my Co-op experience that provided me with very different experiences. The first project I worked on I was able to be the sole controls engineer on the job and was able to see the project through from start to finish. This meant I was able to get the time in preliminary software's such as AutoCAD electrical working on the prints, to working on the PLC and debugging on the floor, to seeing the customer come in and be very pleased with their runoff. The second project I worked on was a much larger project where I had the pleasure to work alongside a handful of other controls engineers also on the same job. This variation in job size throughout the rotation was something I really enjoyed and am extremely glad I was able to receive.

Working in L3Harris's CAS department

Izik
Major: Electrical Engineering I learned quite a bit about the flight recorders that L3Harris makes along with some of their other product lines. I was tasked with a good mix of production issues and then improvement projects that helped the production line and test engineering department as well. The main task was updating documentation for a test station and building it from the documentation I made.

Second Co-op Rotation

Jason
Major: Electrical Engineering The tasks that I was assigned to do was to write software tests, find bugs in a system, and building products.

Co-op at Phase 1

Isabelle
Major: Electrical Engineering At Phase 1, I worked on GPS trackers, linear motors, PCB designs, and schematic capture. These all were huge applications to the projects I helped complete.

A Great Environment

Ian
Major: Electrical Engineering During my internship I was able to get an fpga program that runs MAPS (Modular active protection system) up and running. I got the same fpga with different firmware to send and receive data over TSN (time sensitive networking), and I designed a gui application from the ground up that would create configuration files for a bridged endpoint.

Service Engineer Co-op

Mark
Major: Electrical Engineering Over the entirety of my co-op rotation, I completed two main tasks. The first task I completed was programming for a machine that aided in the assembly of luxury car grills. The main thing I did was help use a LIN protocol to set the software for these car grills. The other task I completed was to provide service to various customers when a problem arose. This gave me a variety of experiences in problem-solving.

Koops Automation Mechanical Engineer Co-op Experience

Carter
Major: Electrical Engineering Throughout my co-op at Koops Automation Systems, I primarily worked on CAD, designing custom automation solutions. From adding fasteners to creating parts, I designed automated machines to increase production and lessen the manufacturing costs of various products.

CO-OP in Electrical building design

Joseph
Major: Electrical Engineering This semester I helped with a Red Arrow project that were apartments in Detroit Michigan. I work on some schools helping the K-12 group, most of my recent types has been working on Washtenaw Armory, Dearborn Inn, and Eden Park which is a park in Detroit Michigan. Most of our projects are in metro Detroit because the company is based in metro Detroit. However, there are some projects that are in Grand Rapids and Muskegon. As an electrical CO-OP, I placed outlets on plans, placed lighting equipment on plans, created circuits for the buildings to use and did lighting calculations which are calculation to do to make sure there is enough light in an area. A lot of our work is designing based on what is allowable by the code standards in Michigan.

3rd Co-op Rotation

Yougourthene
Major: Electrical Engineering I took charge of this exciting project involving the development of a new machine for producing Dodge Durango tail lights. Using AutoCAD, I crafted the electrical prints and organized the control panel layout. Following that, I handled the wiring of the control panel and created the PLC program, ensuring seamless machine operation by programming the HMI screen. As an additional measure, I incorporated Keyence vision systems into the project to elevate quality control and establish a secure work environment.

Electrical Design at TowerPinkster

Justin
Major: Electrical Engineering Performed electrical design tasks for commercial archecture projects in the K/12, higher education, government, commercial, and other industry sectors.

3rd Co-Op Rotation

Jake
Major: Electrical Engineering My daily tasks for this rotation varied since there are around 200 test stations that need to be sustained at the GR site. Tasks daily could range from software updates/debugging, to hardware/circuit trouble shooting and debugging. The main tasks I completed were ordering parts for two new stations worth over $100,000 and creating new electrical drawing packages for the new test station. Other than those tasks I made a few larger software updates to improve testing efficiency by adding new libraries.

Electrical Design at TowerPinkster

Justin
Major: Electrical Engineering I did electrical design for various architecture projects ranging from elementary schools to affordable housing for the elderly. My responsibilities as a designer spanned from the electrical pole on the street all the way to the light switch.

Koops Service Co-op Rotation

Ethan
Major: Electrical Engineering I built and wired a panel to run a machine, I built, modified, and tuned that machine, and I also programmed a small portion of it. I also went on various service trips both in and out of state, refurbishing and fixing old machines.

Controls Engineering Co-op at Progressive Surface

Taylor
Major: Electrical Engineering Task that I have worked on at Progressive Surface include working on project schematics and layouts, setting up computers for the machines, and wiring components for testing purposes.

Signal integrity / Power integrity Co-op Experience

Ian
Major: Electrical Engineering As a SIPI co-op student, I performed time-domain and frequency-domain measurements on customer products. I also performed EMC pre-compliance testing on customer products, as well as networked and discussed various engineering topics with customers.